JOIN THE CONVERSATION
  HOME       LOGIN      CONTACT
 

Originally published in Interiors & Sources

01/25/2013

Masonry Maintenance: Extending Envelope Value

Detect failures early so crumbling walls don't chip away at your wallet

By

 

Pay close attention to the transitions where two dissimilar materials attach. There is added stress at these locations due to the coefficient of expansion plus contraction. Issues will show up on the horizontal plane near the vertical wall joint, which is a major source of water intrusion. Ensure sealants here are intact and doing their job.
Credit: VALCOURT BUILDING SERVICES

Masonry problems don’t have to hit you like a ton of bricks. With an inspection and maintenance plan in place, you’ll be able to pinpoint problems before they become severe and expensive to fix.

Take these steps so that when you identify an issue, you won’t be up against the wall.

Look for Moisture Infiltration
Look at your exterior wall system as an asset and adopt a preventive approach. It is recommended to perform annual or bi-annual walkthroughs to gauge overall condition. Knowledgeable in-house staff can conduct the inspection – otherwise it’s wise to enlist engineers or consultants.

Industry Advice on Maintaining Masonry

  • Remove and replace torn, deteriorated, or inelastic sealants

  • When repairing mortar joints, surface grout hairline cracks and repoint damaged or deteriorating mortar joints

  • Repoint with prehydrated mortar, mixed drier than for conventional masonry work

  • Remove ivy and plant growth that contributes to moisture penetration or deterioration of brickwork

  • Exercise care in opening existing weeps or drilling new ones to ensure that flashing is not damaged

  • Install a damp-proof course if missing or required

  • Install remedial anchors and ties in accordance with manufacturer recommendations

  • Correct all deficiencies before application of external coatings
ADAPTED FROM BRICK INDUSTRY ASSOCIATION TECHNICAL NOTES
“An overall survey of the building will help determine the best moves going forward to ensure value and longevity,” says Leta Hardy, vice president of business development for Valcourt Building Services, a waterproofing and restoration firm. “Set it on your calendar, take photos, and document everything. This way, when a problem arises, you don’t have to be Sherlock Holmes.”

If you’re in a freeze/thaw climate, perform two inspections – once at the end of the freeze season in spring, and again prior to the next one in autumn.

“This allows you to see the effects of temperature change on the building. The same thing happens in tropical temperatures because of air conditioning on the interior and extreme heat on the exterior,” Hardy explains.

First, look at all sealants and flashing to make sure they’re diverting water as intended, Hardy suggests. As an absorptive cladding, masonry can tolerate more moisture than most, but once it reaches a certain saturation point, you’ll notice signs of damage.

“At the base of the brick wall, you can observe these freeze/thaw cycles,” says Brock Osborn, business development manager of reStore, the restoration program of the cladding and coating systems manufacturer Sto Corp. “After a threshold, masonry can start deteriorating.”

Most problems can be identified from visual cues, Osborn says. Cracks are a good indication that moisture infiltration has occurred, says Christopher Perego, industry sector manager of parking and restoration for chemical manufacturer BASF.

“The biggest mistake is to dismiss cracks. New buildings can expect a certain amount of cracking, but spider cracks are indicative of damage,” says Perego. “After those, it’ll just crumble.”


Pages: 1  2  View All  
 

 

©Copyright 2013 Stamats Communications, Inc. All rights reserved. / Interiors & Sources